Crown · Baseboard · Casing · Wainscoting
Millwork is one of the biggest visual upgrades a home can get, and installing it is simpler than most people expect. Here is every step of a Placidity millwork installation, from the first conversation to the final walkthrough, so you know exactly what will happen in your home and when.
Still deciding on the look? Start with our Trim & Crown design page to see what new millwork can do for a room, then come back here to see how we install it.
Every home is a little different, but every millwork installation, from crown molding and baseboards to casings and wainscoting, follows these nine steps.
We start by talking about the rooms you want to change and the feeling you’re going for. We look at your ceiling heights, existing trim, wall condition, outlets, vents and windows, because all of those shape what will look best and what the install involves.
Next we help you pick the actual shapes: crown size and style, baseboard height, casing width, and for wainscoting the panel style (raised, flat, board and batten, or beadboard), its height, and the chair rail cap. We match the scale to your room so nothing looks too heavy or too thin.
We also settle the finish: paint color, sheen, and whether trim matches or contrasts with the walls.
We measure every wall, corner and opening, and plan the layout. For wainscoting that means spacing the panels so they come out even on every wall and line up with windows, outlets and doors. You receive a written proposal with the rooms, profiles, finish and scope spelled out.
Once you approve, we order your materials. Wood and MDF move slightly with temperature and humidity, so after delivery the material rests inside your home for a short period to adjust to its conditions. This small step helps prevent gaps and cracked joints later, especially in South Florida humidity.
On install day we protect your home first: floor coverings along every work path and dust barriers where needed. If old baseboard or casing is being replaced, we remove it carefully and prepare the wall and floor edges.
This is where the room transforms. We locate studs and ceiling joists, add backing where needed, then cut and fit each piece.
Expect the sound of nail guns during working hours. We set up our saw and cut the trim outside your home, so the loudest noise and most of the sawdust stay out of your living space, unless you approve another spot.
Here’s the step that separates good trim from great trim. Every nail hole is filled, every seam and joint is filled and sanded smooth, and the gaps where trim meets the wall and ceiling are caulked so the trim looks like part of the house, not something added to it.
Your trim is primed where needed and finished with smooth sprayed or brushed coats in the color and sheen you chose. Our sister company, Placidity Pro Painting, can also refresh the walls at the same time so everything is finished together.
We walk every room with you, looking at corners, seams and paint up close. Anything that isn’t right gets touched up. We clean up, remove protection, and leave the space ready to enjoy.
The steps are the same, but each type of millwork has its own details worth knowing.
Crown sits at an angle between wall and ceiling, so it is the most precise cut in finish carpentry. Ceilings are rarely perfectly flat, and caulk and careful fitting make the line look straight. Larger crowns may need wood blocking behind them, and crown can include a channel for hidden LED lighting.
Taller baseboards and wider casings make the biggest difference for the least disruption. Replacing existing trim means removing the old pieces first, and occasionally small wall or floor repairs show up behind them, which we’ll talk through with you before going further.
Wainscoting takes the most planning. Panel layout, height and outlet locations are worked out before anything goes on the wall, so the spacing looks intentional on every side. Outlets and switches inside the paneled area may need box extenders, which is part of the plan, not a surprise.
Nail guns are loud in short bursts while trim is fastened. Cutting happens outside, and the fill, caulk and paint stages are quiet.
Trim is cut outside and work zones are covered. Sanding filler creates a fine dust that we contain and clean up, but it’s smart to close vents or doors to nearby rooms you want to keep spotless.
You can stay in your home throughout. The rooms being worked on will be off-limits for stretches, and we’ll let you know which spaces are affected each day.
Tools, cords and fresh caulk don’t mix with curious paws or hands. Plan to keep pets and little ones out of the work rooms until each day is wrapped up.
Your schedule is set in your written proposal. What changes it most is the scope:
One statement room moves quickly. A whole-home upgrade is scheduled room by room.
Baseboard and casing are fastest. Crown takes more precision, and wainscoting takes the most layout and fitting.
Removing old trim, wall repairs, and paint dry times between coats all add to the schedule.
Not the whole time. We like to see you at the start of the first day and at the final walkthrough. Between those, many homeowners go about their normal day.
Often, yes. Many standard profiles are still available, and the Millwork Catalog shows what we carry. If an exact match isn’t available, we can suggest a close profile or a room-by-room approach so the change looks deliberate.
Not always. New trim and caulk lines usually only need touch-ups on the wall nearby. Many homeowners choose to repaint at the same time so the whole room feels new, and Placidity Pro Painting can handle both.
Yes. Crown can be installed with a channel for discreet ambient LED lighting. Electrical work is planned during the consultation so the lighting is part of the design from the start.
Very few are. Scribing, shimming, careful fitting and caulk are how a skilled installer makes trim look straight on an imperfect house, and it’s a normal part of every job.
Tell us about your rooms and we’ll walk you through every step.
Explore trim & crown molding designs →